The Future of Bible Study Is Here.
1 Kings 7:33–37
33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast. 34 There were four supports at the four corners of each stand. The supports were of one piece with the stands. 35 And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it. 36 And on the surfaces of its stays and on its panels, he carved cherubim, lions, and palm trees, according to the space of each, with wreaths all around. 37 After this manner he made qthe ten stands. All of them were cast alike, of the same measure and the same form.
1 Kings 7:33–37 — New International Version (2011) (NIV)
33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
34 Each stand had four handles, one on each corner, projecting from the stand. 35 At the top of the stand there was a circular band half a cubit deep. The supports and panels were attached to the top of the stand. 36 He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around. 37 This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.
1 Kings 7:33–37 — King James Version (KJV 1900)
33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten. 34 And there were four undersetters to the four corners of one base: and the undersetters were of the very base itself. 35 And in the top of the base was there a round compass of half a cubit high: and on the top of the base the ledges thereof and the borders thereof were of the same. 36 For on the plates of the ledges thereof, and on the borders thereof, he graved cherubims, lions, and palm trees, according to the proportion of every one, and additions round about. 37 After this manner he made the ten bases: all of them had one casting, one measure, and one size.
1 Kings 7:33–37 — New Living Translation (NLT)
33 and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.
34 There were handles at each of the four corners of the carts, and these, too, were cast as one unit with the cart. 35 Around the top of each cart was a rim nine inches wide. The corner supports and side panels were cast as one unit with the cart. 36 Carvings of cherubim, lions, and palm trees decorated the panels and corner supports wherever there was room, and there were wreaths all around. 37 All ten water carts were the same size and were made alike, for each was cast from the same mold.
1 Kings 7:33–37 — The New King James Version (NKJV)
33 The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze. 34 And there were four supports at the four corners of each cart; its supports were part of the cart itself. 35 On the top of the cart, at the height of half a cubit, it was perfectly round. And on the top of the cart, its flanges and its panels were of the same casting. 36 On the plates of its flanges and on its panels he engraved cherubim, lions, and palm trees, wherever there was a clear space on each, with wreaths all around. 37 Thus he made the ten carts. All of them were of the same mold, one measure, and one shape.
1 Kings 7:33–37 — New Century Version (NCV)
33 The wheels were like a chariot’s wheels. Everything on the wheels—the axles, rims, spokes, and hubs—were made of bronze.
34 The four supports were on the four corners of each stand. They were made as one piece with the stand. 35 A strip of bronze around the top of each stand was nine inches deep. It was also made as one piece with the stand. 36 The sides of the stand and the frames were covered with carvings of creatures with wings, as well as lions, palm trees, and flowers. 37 This is the way Huram made the ten stands. The bronze for each stand was melted and poured into a mold, so all the stands were the same size and shape.
1 Kings 7:33–37 — American Standard Version (ASV)
33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten. 34 And there were four undersetters at the four corners of each base: the undersetters thereof were of the base itself. 35 And in the top of the base was there a round compass half a cubit high; and on the top of the base the stays thereof and the panels thereof were of the same. 36 And on the plates of the stays thereof, and on the panels thereof, he graved cherubim, lions, and palm-trees, according to the space of each, with wreaths round about. 37 After this manner he made the ten bases: all of them had one casting, one measure, and one form.
1 Kings 7:33–37 — 1890 Darby Bible (DARBY)
33 And the work of the wheels was like the work of a chariot wheel: their supports, and their rims, and their spokes and their naves were all molten. 34 And there were four shoulder-pieces to the four corners of one base; of the base itself were its shoulder-pieces. 35 And in the top of the base there was a circular elevation of half a cubit round about; and on the top of the base its stays and its panels were of the same. 36 And he engraved on the plates of its stays and on its panels cherubim, lions and palm-trees, according to the space upon each; and garlands were round about. 37 After this manner he made the ten bases: all of them had one casting, one measure, one form.
1 Kings 7:33–37 — GOD’S WORD Translation (GW)
33 The wheels were made like chariot wheels. The axles, rims, spokes, and hubs were all cast metal. 34 The four supports at the four corners of each stand were part of the stand. 35 The top of each stand had a round, nine-inch-high band. Above the stand were supports which were part of the panels. 36 Hiram engraved angels, lions, palm trees, and designs in every available space on the supports and panels. 37 This is the way he made the ten stands. All of them were cast in the same mold, identical in size and shape.
1 Kings 7:33–37 — The Holman Christian Standard Bible (HCSB)
33 The wheels’ design was similar to that of chariot wheels: their axles, rims, spokes, and hubs were all of cast metal. 34 Four supports were at the four corners of each water cart; each support was one piece with the water cart. 35 At the top of the cart was a band nine inches high encircling it; also, at the top of the cart, its braces and its frames were one piece with it. 36 He engraved cherubim, lions, and palm trees on the plates of its braces and on its frames, wherever each had space, with encircling wreaths. 37 In this way he made the 10 water carts using the same casting, dimensions, and shape for all of them.
1 Kings 7:33–37 — New Revised Standard Version: Updated Edition (NRSVue)
33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast. 34 There were four supports at the four corners of each stand; the supports were of one piece with the stands. 35 On the top of the stand there was a round band half a cubit high; on the top of the stand, its stays and its borders were of one piece with it. 36 On the surfaces of its stays and on its borders he carved cherubim, lions, and palm trees where each had space, with wreaths all around. 37 In this way he made the ten stands; all of them were cast alike, with the same size and the same form.
1 Kings 7:33–37 — The Lexham English Bible (LEB)
33 The construction of the wheel was like the construction of the wheel of the chariot; their axles, their rims, their spokes, and their naves were all cast. 34 The four supports were the four corners of each stand, with the stand supporting it. 35 On top of the stand was half a cubit deep, circular all around, and on the top of the stand were its supports and its frames. 36 He engraved on the plates, on its supports, and on its frame cherubim, lions and images of a palm tree, according to the space for each, with wreaths all around. 37 He made the ten stands like this in one cast, with the same measurement and shape for each of them.
1 Kings 7:33–37 — New International Reader’s Version (1998) (NIrV)
33 The wheels were made like chariot wheels. All of the axles, rims, spokes and hubs were made out of metal.
34 Each stand had four handles on it. There was one on each corner. They came out from the stand. 35 At the top of the stand there was a round band. It was nine inches deep. The sides and supports were connected to the top of the stand.
36 Huram carved cherubim, lions and palm trees on the sides of the stands. He also carved them on the surfaces of the supports. His carving covered every open space. He had also carved wreaths all around.
37 That’s how he made the ten stands. All of them were made in the same molds. And they had the same size and shape.
1 Kings 7:33–37 — New American Standard Bible (1995) (NASB95)
33 The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast.
34 Now there were four supports at the four corners of each stand; its supports were part of the stand itself.
35 On the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it.
36 He engraved on the plates of its stays and on its borders, cherubim, lions and palm trees, according to the clear space on each, with wreaths all around.
37 He made the ten stands like this: all of them had one casting, one measure and one form.
Sign Up to Use Our
Free Bible Study Tools
|
By registering for an account, you agree to Logos’ Terms of Service and Privacy Policy.
|