30 Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. 31 On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round. 32 The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. 33 The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

30 Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. 31 Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round. 32 And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half. 33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast.

30 And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition. 31 And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round. 32 And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit. 33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten.

30 Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths. 31 The top of each cart had a rounded frame for the basin. It projected 1½ feet above the cart’s top like a round pedestal, and its opening was 2¼ feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round. 32 Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2¼ feet in diameter 33 and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.

30 Every cart had four bronze wheels and axles of bronze, and its four feet had supports. Under the laver were supports of cast bronze beside each wreath. 31 Its opening inside the crown at the top was one cubit in diameter; and the opening was round, shaped like a pedestal, one and a half cubits in outside diameter; and also on the opening were engravings, but the panels were square, not round. 32 Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits. 33 The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze.

30 Each stand had four bronze wheels with bronze axles. At the corners there were bronze supports for a large bowl, and the supports had designs of flowers. 31 There was a frame on top of the bowls, eighteen inches high above the bowls. The opening of the bowl was round, twenty-seven inches deep. Designs were carved into the bronze on the frame, which was square, not round. 32 The four wheels, placed under the frame, were twenty-seven inches high. The axles between the wheels were made as one piece with the stand. 33 The wheels were like a chariot’s wheels. Everything on the wheels—the axles, rims, spokes, and hubs—were made of bronze.

30 And every base had four brazen wheels, and axles of brass; and the four feet thereof had undersetters: beneath the laver were the undersetters molten, with wreaths at the side of each. 31 And the mouth of it within the capital and above was a cubit: and the mouth thereof was round after the work of a pedestal, a cubit and a half; and also upon the mouth of it were gravings, and their panels were foursquare, not round. 32 And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit. 33 And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten.

30 And every base had four wheels of brass, and axles of brass; and on its four corners were shoulder-pieces: under the laver were shoulder-pieces molten, behind every garland. 31 And the mouth of it within the crown and above was a cubit; and its mouth was rounded, as the work of the base, a cubit and a half; and also upon its mouth was sculpture; but their panels were square, not round. 32 And the four wheels were under the panels; and the supports of the wheels were in the base; and the height of a wheel was a cubit and half a cubit. 33 And the work of the wheels was like the work of a chariot wheel: their supports, and their rims, and their spokes and their naves were all molten.

30 Each stand had four bronze wheels on bronze axles and four supports beneath the basin. The supports were made of cast metal with designs on the sides. 31 Each had a 1½-foot-deep opening in the center to the circular frame on top. The opening was round, formed like a pedestal, and was two feet ⸤wide⸥. Around the opening there were engravings. But the panels were square, not round. 32 The four wheels were under the panels, and the axles were attached to the stand. Each wheel was two feet high. 33 The wheels were made like chariot wheels. The axles, rims, spokes, and hubs were all cast metal.

30 Each cart had four bronze wheels with bronze axles. Underneath the four corners of the basin were cast supports, each next to a wreath. 31 And the water cart’s opening inside the crown on top was 18 inches wide. The opening was round, made as a pedestal 27 inches wide. On it were carvings, but their frames were square, not round. 32 There were four wheels under the frames, and the wheel axles were part of the water cart; each wheel was 27 inches tall. 33 The wheels’ design was similar to that of chariot wheels: their axles, rims, spokes, and hubs were all of cast metal.

30 Each stand had four bronze wheels and axles of bronze; at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. 31 Its opening was within the crown whose height was one cubit; its opening was round, as a pedestal is made; it was a cubit and a half wide. At its opening there were carvings; its borders were four-sided, not round. 32 The four wheels were underneath the borders; the axles of the wheels were in the stands; and the height of a wheel was a cubit and a half. 33 The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast.

30 Each stand had four bronze wheels with bronze axles. Each one had a bowl that rested on four supports. They had wreaths on each side.

31 There was a round opening on the inside of each stand. The opening had a frame that was 18 inches deep. The sides were 27 inches high from the top of the opening to the bottom of the base. There was carving around the opening. The sides of the stands were square, not round.

32 The four wheels were under the sides. The axles of the wheels were connected to the stand. Each wheel was 27 inches across. 33 The wheels were made like chariot wheels. All of the axles, rims, spokes and hubs were made out of metal.

30 Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side.

31 Its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and also on its opening there were engravings, and their borders were square, not round.

32 The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.

33 The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast.