27 He also made ten movable stands of bronze; each was four cubits long, four wide and three high. 28 This is how the stands were made: They had side panels attached to uprights. 29 On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work. 30 Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. 31 On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round. 32 The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.

27 He also made the ten stands of bronze. Each stand was four cubits long, four cubits wide, and three cubits high. 28 This was the construction of the stands: they had panels, and the panels were set in the frames, 29 and on the panels that were set in the frames were lions, oxen, and cherubim. On the frames, both above and below the lions and oxen, there were wreaths of beveled work. 30 Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. 31 Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round. 32 And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half.

27 And he made ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. 28 And the work of the bases was on this manner: they had borders, and the borders were between the ledges: 29 And on the borders that were between the ledges were lions, oxen, and cherubims: and upon the ledges there was a base above: and beneath the lions and oxen were certain additions made of thin work. 30 And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition. 31 And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round. 32 And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit.

27 Huram also made ten bronze water carts, each 6 feet long, 6 feet wide, and 4½ feet tall. 28 They were constructed with side panels braced with crossbars. 29 Both the panels and the crossbars were decorated with carved lions, oxen, and cherubim. Above and below the lions and oxen were wreath decorations. 30 Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths. 31 The top of each cart had a rounded frame for the basin. It projected 1½ feet above the cart’s top like a round pedestal, and its opening was 2¼ feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round. 32 Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2¼ feet in diameter

27 Then Huram made ten bronze stands, each one six feet long, six feet wide, and four and one-half feet high. 28 The stands were made from square sides, which were put on frames. 29 On the sides were bronze lions, bulls, and creatures with wings. On the frames above and below the lions and bulls were designs of flowers hammered into the bronze. 30 Each stand had four bronze wheels with bronze axles. At the corners there were bronze supports for a large bowl, and the supports had designs of flowers. 31 There was a frame on top of the bowls, eighteen inches high above the bowls. The opening of the bowl was round, twenty-seven inches deep. Designs were carved into the bronze on the frame, which was square, not round. 32 The four wheels, placed under the frame, were twenty-seven inches high. The axles between the wheels were made as one piece with the stand.

27 And he made the ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. 28 And the work of the bases was on this manner: they had panels; and there were panels between the ledges; 29 and on the panels that were between the ledges were lions, oxen, and cherubim; and upon the ledges there was a pedestal above; and beneath the lions and oxen were wreaths of hanging work. 30 And every base had four brazen wheels, and axles of brass; and the four feet thereof had undersetters: beneath the laver were the undersetters molten, with wreaths at the side of each. 31 And the mouth of it within the capital and above was a cubit: and the mouth thereof was round after the work of a pedestal, a cubit and a half; and also upon the mouth of it were gravings, and their panels were foursquare, not round. 32 And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

27 And he made ten bases of brass: four cubits was the length of one base, and the breadth four cubits, and the height three cubits. 28 And the work of the bases was this: they had panels, and the panels were between the fillets. 29 And on the panels that were between the fillets were lions, oxen and cherubim; and over the fillets there was a base above; and beneath the lions and oxen were garlands of festoon-work. 30 And every base had four wheels of brass, and axles of brass; and on its four corners were shoulder-pieces: under the laver were shoulder-pieces molten, behind every garland. 31 And the mouth of it within the crown and above was a cubit; and its mouth was rounded, as the work of the base, a cubit and a half; and also upon its mouth was sculpture; but their panels were square, not round. 32 And the four wheels were under the panels; and the supports of the wheels were in the base; and the height of a wheel was a cubit and half a cubit.

27 He made ten bronze stands. Each stand was 6 feet square and 4½ feet high. 28 The stands were made this way: They had side panels set in frames. 29 On the panels set in frames were lions, oxen, and angels.These were also on the frames. Above and below the lions and the cattle were engraved designs. 30 Each stand had four bronze wheels on bronze axles and four supports beneath the basin. The supports were made of cast metal with designs on the sides. 31 Each had a 1½-foot-deep opening in the center to the circular frame on top. The opening was round, formed like a pedestal, and was two feet ⸤wide⸥. Around the opening there were engravings. But the panels were square, not round. 32 The four wheels were under the panels, and the axles were attached to the stand. Each wheel was two feet high.

27 Then he made 10 bronze water carts. Each water cart was six feet long, six feet wide, and 4½ feet high. 28 This was the design of the carts: They had frames; the frames were between the cross-pieces, 29 and on the frames between the cross-pieces were lions, oxen, and cherubim. On the cross-pieces there was a pedestal above, and below the lions and oxen were wreaths of hanging work. 30 Each cart had four bronze wheels with bronze axles. Underneath the four corners of the basin were cast supports, each next to a wreath. 31 And the water cart’s opening inside the crown on top was 18 inches wide. The opening was round, made as a pedestal 27 inches wide. On it were carvings, but their frames were square, not round. 32 There were four wheels under the frames, and the wheel axles were part of the water cart; each wheel was 27 inches tall.

27 He also made the ten stands of bronze; each stand was four cubits long, four cubits wide, and three cubits high. 28 This was the construction of the stands: they had borders; the borders were within the frames; 29 on the borders that were set in the frames were lions, oxen, and cherubim. On the frames, both above and below the lions and oxen, there were wreaths of beveled work. 30 Each stand had four bronze wheels and axles of bronze; at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. 31 Its opening was within the crown whose height was one cubit; its opening was round, as a pedestal is made; it was a cubit and a half wide. At its opening there were carvings; its borders were four-sided, not round. 32 The four wheels were underneath the borders; the axles of the wheels were in the stands; and the height of a wheel was a cubit and a half.

27 He made the ten stands of bronze; each stand was four cubits long, four cubits wide, and three cubits in height. 28 Now this was the construction of the stands: there were frames for them and frames between the crossbars, 29 and on the frames which were between the crossbars were lions, oxen, and cherubim. On the crossbars both above and beneath the lions and oxen were works of cascading wreaths. 30 There were four bronze wheels for each of the stands, with bronze axles; the four support pedestals for these were under the basin, and the supports were decorated on each side with wreaths. 31 Its opening from the inside of the capital and above was a cubit; its pedestal was a round work of a cubit and a half; moreover, on its opening were the carvings with four-sided frames, not circular. 32 Four of the wheels were underneath the frames, and the axles of the wheels were on the stands. The height of each wheel was a cubit and a half.

27 Huram also made ten stands out of bronze. They could be moved around. Each stand was six feet long. It was six feet wide. And it was four and a half feet high. 28 Here is how the stands were made. They had sides that were joined to posts. 29 On the sides between the posts were lions, bulls and cherubim. They were also on all of the posts. Above and below the lions and bulls were wreaths that were made out of hammered metal.

30 Each stand had four bronze wheels with bronze axles. Each one had a bowl that rested on four supports. They had wreaths on each side.

31 There was a round opening on the inside of each stand. The opening had a frame that was 18 inches deep. The sides were 27 inches high from the top of the opening to the bottom of the base. There was carving around the opening. The sides of the stands were square, not round.

32 The four wheels were under the sides. The axles of the wheels were connected to the stand. Each wheel was 27 inches across.

27 Then he made the ten stands of bronze; the length of each stand was four cubits and its width four cubits and its height three cubits.

28 This was the design of the stands: they had borders, even borders between the frames,

29 and on the borders which were between the frames were lions, oxen and cherubim; and on the frames there was a pedestal above, and beneath the lions and oxen were wreaths of hanging work.

30 Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side.

31 Its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and also on its opening there were engravings, and their borders were square, not round.

32 The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.